perlintern - autogenerated documentation of purely internal Perl functions
This file is the autogenerated documentation of functions in the Perl interpreter that are documented using Perl's internal documentation format but are not marked as part of the Perl API. In other words, they are not for use in extensions!
It has the same sections as perlapi, though some may be empty.
av_fetch_simple This is a cut-down version of av_fetch that assumes that the array is very straightforward - no magic, not readonly, and AvREAL - and that key is not negative. This function MUST NOT be used in situations where any of those assumptions may not hold.
Returns the SV at the specified index in the array. The key is the index. If lval is true, you are guaranteed to get a real SV back (in case it wasn't real before), which you can then modify. Check that the return value is non-null before dereferencing it to a SV*.
The rough perl equivalent is $myarray[$key].
SV** av_fetch_simple(AV *av, SSize_t key, I32 lval)AvFILLp If the array av is empty, this returns -1; otherwise it returns the maximum value of the indices of all the array elements which are currently defined in av. It does not handle magic, hence the p private indication in its name.
SSize_t AvFILLp(AV* av)av_new_alloc This implements "newAV_alloc_x" in perlapi and "newAV_alloc_xz" in perlapi, which are the public API for this functionality.
Creates a new AV and allocates its SV* array.
This is similar to, but more efficient than doing:
AV *av = newAV();
av_extend(av, key);The size parameter is used to pre-allocate a SV* array large enough to hold at least elements 0..(size-1). size must be at least 1.
The zeroflag parameter controls whether or not the array is NULL initialized.
AV* av_new_alloc(SSize_t size, bool zeroflag)av_store_simple This is a cut-down version of av_store that assumes that the array is very straightforward - no magic, not readonly, and AvREAL - and that key is not negative. This function MUST NOT be used in situations where any of those assumptions may not hold.
Stores an SV in an array. The array index is specified as key. It can be dereferenced to get the SV* that was stored there (= val)).
Note that the caller is responsible for suitably incrementing the reference count of val before the call.
Approximate Perl equivalent: splice(@myarray, $key, 1, $val).
SV** av_store_simple(AV *av, SSize_t key, SV *val)dowantarray Implements the deprecated "GIMME" in perlapi.
U8 dowantarray()leave_scope Implements LEAVE_SCOPE which you should use instead.
void leave_scope(I32 base)pop_scope Implements "LEAVE" in perlapi
void pop_scope()push_scope Implements "ENTER" in perlapi
void push_scope()save_adelete Implements SAVEADELETE.
void save_adelete(AV *av, SSize_t key)save_generic_pvref Implements SAVEGENERICPV.
Like save_pptr(), but also Safefree()s the new value if it is different from the old one. Can be used to restore a global char* to its prior contents, freeing new value.
void save_generic_pvref(char** str)save_generic_svref Implements SAVEGENERICSV.
Like save_sptr(), but also SvREFCNT_dec()s the new value. Can be used to restore a global SV to its prior contents, freeing new value.
void save_generic_svref(SV** sptr)save_hdelete Implements SAVEHDELETE.
void save_hdelete(HV *hv, SV *keysv)save_hints Implements SAVEHINTS.
void save_hints()save_op Implements SAVEOP.
void save_op()save_padsv_and_mortalize Implements SAVEPADSVANDMORTALIZE.
void save_padsv_and_mortalize(PADOFFSET off)save_set_svflags Implements SAVESETSVFLAGS.
Set the SvFLAGS specified by mask to the values in val
void save_set_svflags(SV *sv, U32 mask, U32 val)Implements SAVESHAREDPV.
Like save_generic_pvref(), but uses PerlMemShared_free() rather than Safefree(). Can be used to restore a shared global char* to its prior contents, freeing new value.
void save_shared_pvref(char** str)save_vptr Implements SAVEVPTR.
void save_vptr(void *ptr)There are only public API items currently in Casting
There are only public API items currently in Character case changing
There are only public API items currently in Character classification
There are only public API items currently in Compiler and Preprocessor information
There are only public API items currently in Compiler directives
BhkENTRY NOTE: BhkENTRY is experimental and may change or be removed without notice.
Return an entry from the BHK structure. which is a preprocessor token indicating which entry to return. If the appropriate flag is not set this will return NULL. The type of the return value depends on which entry you ask for.
void * BhkENTRY(BHK *hk, which)BhkFLAGS NOTE: BhkFLAGS is experimental and may change or be removed without notice.
Return the BHK's flags.
U32 BhkFLAGS(BHK *hk)CALL_BLOCK_HOOKS NOTE: CALL_BLOCK_HOOKS is experimental and may change or be removed without notice.
Call all the registered block hooks for type which. which is a preprocessing token; the type of arg depends on which.
void CALL_BLOCK_HOOKS(which, arg)CXt_BLOCKCXt_EVALCXt_FORMATCXt_GIVENCXt_LOOP_ARYCXt_LOOP_LAZYIVCXt_LOOP_LAZYSVCXt_LOOP_LISTCXt_LOOP_PLAINCXt_NULLCXt_SUBCXt_SUBSTCXt_WHENDescribed in perlguts.
my_fork This is for the use of PerlProc_fork as a wrapper for the C library fork(2) on some platforms to hide some platform quirks. It should not be used except through PerlProc_fork.
Pid_t my_fork()There are only public API items currently in COPs and Hint Hashes
core_prototype This function assigns the prototype of the named core function to sv, or to a new mortal SV if sv is NULL. It returns the modified sv, or NULL if the core function has no prototype. code is a code as returned by keyword(). It must not be equal to 0.
SV * core_prototype(SV *sv, const char *name, const int code,
int * const opnum)CvWEAKOUTSIDE Each CV has a pointer, CvOUTSIDE(), to its lexically enclosing CV (if any). Because pointers to anonymous sub prototypes are stored in & pad slots, it is a possible to get a circular reference, with the parent pointing to the child and vice-versa. To avoid the ensuing memory leak, we do not increment the reference count of the CV pointed to by CvOUTSIDE in the one specific instance that the parent has a & pad slot pointing back to us. In this case, we set the CvWEAKOUTSIDE flag in the child. This allows us to determine under what circumstances we should decrement the refcount of the parent when freeing the child.
There is a further complication with non-closure anonymous subs (i.e. those that do not refer to any lexicals outside that sub). In this case, the anonymous prototype is shared rather than being cloned. This has the consequence that the parent may be freed while there are still active children, e.g.,
BEGIN { $a = sub { eval '$x' } }In this case, the BEGIN is freed immediately after execution since there are no active references to it: the anon sub prototype has CvWEAKOUTSIDE set since it's not a closure, and $a points to the same CV, so it doesn't contribute to BEGIN's refcount either. When $a is executed, the eval '$x' causes the chain of CvOUTSIDEs to be followed, and the freed BEGIN is accessed.
To avoid this, whenever a CV and its associated pad is freed, any & entries in the pad are explicitly removed from the pad, and if the refcount of the pointed-to anon sub is still positive, then that child's CvOUTSIDE is set to point to its grandparent. This will only occur in the single specific case of a non-closure anon prototype having one or more active references (such as $a above).
One other thing to consider is that a CV may be merely undefined rather than freed, eg undef &foo. In this case, its refcount may not have reached zero, but we still delete its pad and its CvROOT etc. Since various children may still have their CvOUTSIDE pointing at this undefined CV, we keep its own CvOUTSIDE for the time being, so that the chain of lexical scopes is unbroken. For example, the following should print 123:
my $x = 123;
sub tmp { sub { eval '$x' } }
my $a = tmp();
undef &tmp;
print $a->();bool CvWEAKOUTSIDE(CV *cv)docatch Check for the cases 0 or 3 of cur_env.je_ret, only used inside an eval context.
0 is used as continue inside eval,
3 is used for a die caught by an inner eval - continue inner loop
See cop.h: je_mustcatch, when set at any runlevel to TRUE, means eval ops must establish a local jmpenv to handle exception traps.
OP* docatch(Perl_ppaddr_t firstpp)_aDEPTH Some functions when compiled under DEBUGGING take an extra final argument named depth, indicating the C stack depth. This argument is omitted otherwise. This macro expands to either , depth under DEBUGGING, or to nothing at all when not under DEBUGGING, reducing the number of #ifdef's in the code.
The program is responsible for maintaining the correct value for depth.
_aDEPTHdebop Implements -Dt perl command line option on OP o.
I32 debop(const OP* o)debprof Called to indicate that o was executed, for profiling purposes under the -DP command line option.
void debprof(const OP *o)debprofdump Dumps the contents of the data collected by the -DP perl command line option.
void debprofdump()free_c_backtrace Deallocates a backtrace received from get_c_backtrace.
void free_c_backtrace(Perl_c_backtrace* bt)get_c_backtrace Collects the backtrace (aka "stacktrace") into a single linear malloced buffer, which the caller must Perl_free_c_backtrace().
Scans the frames back by depth + skip, then drops the skip innermost, returning at most depth frames.
Perl_c_backtrace* get_c_backtrace(int max_depth, int skip)_pDEPTH This is used in the prototype declarations for functions that take a "_aDEPTH" final parameter, much like pTHX_ is used in functions that take a thread context initial parameter.
PL_DBsingle When Perl is run in debugging mode, with the -d switch, this SV is a boolean which indicates whether subs are being single-stepped. Single-stepping is automatically turned on after every step. This is the C variable which corresponds to Perl's $DB::single variable. See "PL_DBsub".
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
SV * PL_DBsinglePL_DBsub When Perl is run in debugging mode, with the -d switch, this GV contains the SV which holds the name of the sub being debugged. This is the C variable which corresponds to Perl's $DB::sub variable. See "PL_DBsingle".
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
GV * PL_DBsubPL_DBtrace Trace variable used when Perl is run in debugging mode, with the -d switch. This is the C variable which corresponds to Perl's $DB::trace variable. See "PL_DBsingle".
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
SV * PL_DBtracesv_peek Implements SvPEEK
char* sv_peek(SV* sv)cv_dump dump the contents of a CV
void cv_dump(const CV *cv, const char *title)cv_forget_slab When a CV has a reference count on its slab (CvSLABBED), it is responsible for making sure it is freed. (Hence, no two CVs should ever have a reference count on the same slab.) The CV only needs to reference the slab during compilation. Once it is compiled and CvROOT attached, it has finished its job, so it can forget the slab.
void cv_forget_slab(CV *cv)do_dump_pad Dump the contents of a padlist
void do_dump_pad(I32 level, PerlIO *file, PADLIST *padlist,
int full)get_context Implements "PERL_GET_CONTEXT" in perlapi, which you should use instead.
void* get_context()pad_alloc_name Allocates a place in the currently-compiling pad (via "pad_alloc" in perlapi) and then stores a name for that entry. name is adopted and becomes the name entry; it must already contain the name string. typestash and ourstash and the padadd_STATE flag get added to name. None of the other processing of "pad_add_name_pvn" in perlapi is done. Returns the offset of the allocated pad slot.
PADOFFSET pad_alloc_name(PADNAME *name, U32 flags, HV *typestash,
HV *ourstash)pad_block_start Update the pad compilation state variables on entry to a new block.
void pad_block_start(int full)pad_check_dup Check for duplicate declarations: report any of:
* a 'my' in the current scope with the same name;
* an 'our' (anywhere in the pad) with the same name and the
same stash as 'ourstash'is_our indicates that the name to check is an "our" declaration.
void pad_check_dup(PADNAME *name, U32 flags, const HV *ourstash)pad_findlex Find a named lexical anywhere in a chain of nested pads. Add fake entries in the inner pads if it's found in an outer one.
Returns the offset in the bottom pad of the lex or the fake lex. cv is the CV in which to start the search, and seq is the current cop_seq to match against. If warn is true, print appropriate warnings. The out_* vars return values, and so are pointers to where the returned values should be stored. out_capture, if non-null, requests that the innermost instance of the lexical is captured; out_name is set to the innermost matched pad name or fake pad name; out_flags returns the flags normally associated with the PARENT_FAKELEX_FLAGS field of a fake pad name.
Note that pad_findlex() is recursive; it recurses up the chain of CVs, then comes back down, adding fake entries as it goes. It has to be this way because fake names in anon prototypes have to store in xpadn_low the index into the parent pad.
PADOFFSET pad_findlex(const char *namepv, STRLEN namelen,
U32 flags, const CV* cv, U32 seq, int warn,
SV** out_capture, PADNAME** out_name,
int *out_flags)pad_fixup_inner_anons For any anon CVs in the pad, change CvOUTSIDE of that CV from old_cv to new_cv if necessary. Needed when a newly-compiled CV has to be moved to a pre-existing CV struct.
void pad_fixup_inner_anons(PADLIST *padlist, CV *old_cv,
CV *new_cv)pad_free Free the SV at offset po in the current pad.
void pad_free(PADOFFSET po)pad_leavemy Cleanup at end of scope during compilation: set the max seq number for lexicals in this scope and warn of any lexicals that never got introduced.
OP * pad_leavemy()padlist_dup Duplicates a pad.
PADLIST * padlist_dup(PADLIST *srcpad, CLONE_PARAMS *param)padname_dup Duplicates a pad name.
PADNAME * padname_dup(PADNAME *src, CLONE_PARAMS *param)padnamelist_dup Duplicates a pad name list.
PADNAMELIST * padnamelist_dup(PADNAMELIST *srcpad,
CLONE_PARAMS *param)pad_push Push a new pad frame onto the padlist, unless there's already a pad at this depth, in which case don't bother creating a new one. Then give the new pad an @_ in slot zero.
void pad_push(PADLIST *padlist, int depth)pad_reset Mark all the current temporaries for reuse
void pad_reset()pad_setsv Set the value at offset po in the current (compiling or executing) pad. Use the macro PAD_SETSV() rather than calling this function directly.
void pad_setsv(PADOFFSET po, SV* sv)pad_sv Get the value at offset po in the current (compiling or executing) pad. Use macro PAD_SV instead of calling this function directly.
SV* pad_sv(PADOFFSET po)pad_swipe Abandon the tmp in the current pad at offset po and replace with a new one.
void pad_swipe(PADOFFSET po, bool refadjust)set_context Implements "PERL_SET_CONTEXT" in perlapi, which you should use instead.
void set_context(void *t)dSAVEDERRNO Declare variables needed to save errno and any operating system specific error number.
void dSAVEDERRNOdSAVE_ERRNO Declare variables needed to save errno and any operating system specific error number, and save them for optional later restoration by RESTORE_ERRNO.
void dSAVE_ERRNORESTORE_ERRNO Restore errno and any operating system specific error number that was saved by dSAVE_ERRNO or RESTORE_ERRNO.
void RESTORE_ERRNOSAVE_ERRNO Save errno and any operating system specific error number for optional later restoration by RESTORE_ERRNO. Requires dSAVEDERRNO or dSAVE_ERRNO in scope.
void SAVE_ERRNOSETERRNO Set errno, and on VMS set vaxc$errno.
void SETERRNO(int errcode, int vmserrcode)There are only public API items currently in Exception Handling (simple) Macros
There are only public API items currently in Filesystem configuration values
There are only public API items currently in Floating point
There are only public API items currently in General Configuration
There are only public API items currently in Global Variables
gp_dup Duplicate a typeglob, returning a pointer to the cloned object.
GP* gp_dup(GP *const gp, CLONE_PARAMS *const param)gv_handler Implements StashHANDLER, which you should use instead
CV* gv_handler(HV* stash, I32 id)gv_stashsvpvn_cached Returns a pointer to the stash for a specified package, possibly cached. Implements both "gv_stashpvn" in perlapi and "gv_stashsv" in perlapi.
Requires one of either namesv or namepv to be non-null.
If the flag GV_CACHE_ONLY is set, return the stash only if found in the cache; see "gv_stashpvn" in perlapi for details on the other flags.
Note it is strongly preferred for namesv to be non-null, for performance reasons.
HV* gv_stashsvpvn_cached(SV *namesv, const char* name,
U32 namelen, I32 flags)gv_try_downgrade NOTE: gv_try_downgrade is experimental and may change or be removed without notice.
If the typeglob gv can be expressed more succinctly, by having something other than a real GV in its place in the stash, replace it with the optimised form. Basic requirements for this are that gv is a real typeglob, is sufficiently ordinary, and is only referenced from its package. This function is meant to be used when a GV has been looked up in part to see what was there, causing upgrading, but based on what was found it turns out that the real GV isn't required after all.
If gv is a completely empty typeglob, it is deleted from the stash.
If gv is a typeglob containing only a sufficiently-ordinary constant sub, the typeglob is replaced with a scalar-reference placeholder that more compactly represents the same thing.
void gv_try_downgrade(GV* gv)There are only public API items currently in Hook manipulation
hv_eiter_p Implements HvEITER which you should use instead.
NOTE: hv_eiter_p must be explicitly called as Perl_hv_eiter_p with an aTHX_ parameter.
HE** Perl_hv_eiter_p(pTHX_ HV *hv)hv_eiter_set Implements HvEITER_set which you should use instead.
NOTE: hv_eiter_set must be explicitly called as Perl_hv_eiter_set with an aTHX_ parameter.
void Perl_hv_eiter_set(pTHX_ HV *hv, HE *eiter)hv_ename_add Adds a name to a stash's internal list of effective names. See "hv_ename_delete".
This is called when a stash is assigned to a new location in the symbol table.
void hv_ename_add(HV *hv, const char *name, U32 len, U32 flags)hv_ename_delete Removes a name from a stash's internal list of effective names. If this is the name returned by HvENAME, then another name in the list will take its place (HvENAME will use it).
This is called when a stash is deleted from the symbol table.
void hv_ename_delete(HV *hv, const char *name, U32 len,
U32 flags)hv_fill Returns the number of hash buckets that happen to be in use.
This function implements the HvFILL macro which you should use instead.
As of perl 5.25 this function is used only for debugging purposes, and the number of used hash buckets is not in any way cached, thus this function can be costly to execute as it must iterate over all the buckets in the hash.
NOTE: hv_fill must be explicitly called as Perl_hv_fill with an aTHX_ parameter.
STRLEN Perl_hv_fill(pTHX_ HV *const hv)hv_placeholders_get Implements HvPLACEHOLDERS_get, which you should use instead.
NOTE: hv_placeholders_get must be explicitly called as Perl_hv_placeholders_get with an aTHX_ parameter.
I32 Perl_hv_placeholders_get(pTHX_ const HV *hv)hv_placeholders_set Implements HvPLACEHOLDERS_set, which you should use instead.
NOTE: hv_placeholders_set must be explicitly called as Perl_hv_placeholders_set with an aTHX_ parameter.
void Perl_hv_placeholders_set(pTHX_ HV *hv, I32 ph)hv_riter_p Implements HvRITER which you should use instead.
NOTE: hv_riter_p must be explicitly called as Perl_hv_riter_p with an aTHX_ parameter.
I32* Perl_hv_riter_p(pTHX_ HV *hv)hv_riter_set Implements HvRITER_set which you should use instead.
NOTE: hv_riter_set must be explicitly called as Perl_hv_riter_set with an aTHX_ parameter.
void Perl_hv_riter_set(pTHX_ HV *hv, I32 riter)refcounted_he_chain_2hv Generates and returns a HV * representing the content of a refcounted_he chain. flags is currently unused and must be zero.
HV * refcounted_he_chain_2hv(const struct refcounted_he *c,
U32 flags)refcounted_he_fetch_pv Like "refcounted_he_fetch_pvn", but takes a nul-terminated string instead of a string/length pair.
SV * refcounted_he_fetch_pv(const struct refcounted_he *chain,
const char *key, U32 hash, U32 flags)refcounted_he_fetch_pvn Search along a refcounted_he chain for an entry with the key specified by keypv and keylen. If flags has the REFCOUNTED_HE_KEY_UTF8 bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. hash is a precomputed hash of the key string, or zero if it has not been precomputed. Returns a mortal scalar representing the value associated with the key, or &PL_sv_placeholder if there is no value associated with the key.
SV * refcounted_he_fetch_pvn(const struct refcounted_he *chain,
const char *keypv, STRLEN keylen,
U32 hash, U32 flags)refcounted_he_fetch_pvs Like "refcounted_he_fetch_pvn", but takes a literal string instead of a string/length pair, and no precomputed hash.
SV * refcounted_he_fetch_pvs(const struct refcounted_he *chain,
"key", U32 flags)refcounted_he_fetch_sv Like "refcounted_he_fetch_pvn", but takes a Perl scalar instead of a string/length pair.
SV * refcounted_he_fetch_sv(const struct refcounted_he *chain,
SV *key, U32 hash, U32 flags)refcounted_he_free Decrements the reference count of a refcounted_he by one. If the reference count reaches zero the structure's memory is freed, which (recursively) causes a reduction of its parent refcounted_he's reference count. It is safe to pass a null pointer to this function: no action occurs in this case.
void refcounted_he_free(struct refcounted_he *he)refcounted_he_inc Increment the reference count of a refcounted_he. The pointer to the refcounted_he is also returned. It is safe to pass a null pointer to this function: no action occurs and a null pointer is returned.
struct refcounted_he * refcounted_he_inc(
struct refcounted_he *he)refcounted_he_new_pv Like "refcounted_he_new_pvn", but takes a nul-terminated string instead of a string/length pair.
struct refcounted_he * refcounted_he_new_pv(
struct refcounted_he *parent,
const char *key, U32 hash,
SV *value, U32 flags)refcounted_he_new_pvn Creates a new refcounted_he. This consists of a single key/value pair and a reference to an existing refcounted_he chain (which may be empty), and thus forms a longer chain. When using the longer chain, the new key/value pair takes precedence over any entry for the same key further along the chain.
The new key is specified by keypv and keylen. If flags has the REFCOUNTED_HE_KEY_UTF8 bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. hash is a precomputed hash of the key string, or zero if it has not been precomputed.
value is the scalar value to store for this key. value is copied by this function, which thus does not take ownership of any reference to it, and later changes to the scalar will not be reflected in the value visible in the refcounted_he. Complex types of scalar will not be stored with referential integrity, but will be coerced to strings. value may be either null or &PL_sv_placeholder to indicate that no value is to be associated with the key; this, as with any non-null value, takes precedence over the existence of a value for the key further along the chain.
parent points to the rest of the refcounted_he chain to be attached to the new refcounted_he. This function takes ownership of one reference to parent, and returns one reference to the new refcounted_he.
struct refcounted_he * refcounted_he_new_pvn(
struct refcounted_he *parent,
const char *keypv,
STRLEN keylen, U32 hash,
SV *value, U32 flags)refcounted_he_new_pvs Like "refcounted_he_new_pvn", but takes a literal string instead of a string/length pair, and no precomputed hash.
struct refcounted_he * refcounted_he_new_pvs(
struct refcounted_he *parent,
"key", SV *value, U32 flags)refcounted_he_new_sv Like "refcounted_he_new_pvn", but takes a Perl scalar instead of a string/length pair.
struct refcounted_he * refcounted_he_new_sv(
struct refcounted_he *parent,
SV *key, U32 hash, SV *value,
U32 flags)If no one has access to shared string str with length len, free it.
len and hash must both be valid for str.
void unsharepvn(const char* sv, I32 len, U32 hash)dirp_dup Duplicate a directory handle, returning a pointer to the cloned object.
DIR* dirp_dup(DIR *const dp, CLONE_PARAMS *const param)fp_dup Duplicate a file handle, returning a pointer to the cloned object.
PerlIO* fp_dup(PerlIO *const fp, const char type,
CLONE_PARAMS *const param)my_fflush_all Implements PERL_FLUSHALL_FOR_CHILD on some platforms.
I32 my_fflush_all()my_mkostemp The C library mkostemp(3) if available, or a Perl implementation of it.
NOTE: my_mkostemp must be explicitly called as Perl_my_mkostemp .
int Perl_my_mkostemp(char *templte, int flags)my_mkstemp The C library mkstemp(3) if available, or a Perl implementation of it.
NOTE: my_mkstemp must be explicitly called as Perl_my_mkstemp .
int Perl_my_mkstemp(char *templte)PL_last_in_gv The GV which was last used for a filehandle input operation. (<FH>)
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
GV* PL_last_in_gvPL_ofsgv The glob containing the output field separator - *, in Perl space.
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
GV* PL_ofsgvPL_rs The input record separator - $/ in Perl space.
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
SV* PL_rsstart_glob NOTE: start_glob is experimental and may change or be removed without notice.
Function called by do_readline to spawn a glob (or do the glob inside perl on VMS). This code used to be inline, but now perl uses File::Glob this glob starter is only used by miniperl during the build process, or when PERL_EXTERNAL_GLOB is defined. Moving it away shrinks pp_hot.c; shrinking pp_hot.c helps speed perl up.
NOTE: start_glob must be explicitly called as Perl_start_glob with an aTHX_ parameter.
PerlIO* Perl_start_glob(pTHX_ SV *tmpglob, IO *io)There are only public API items currently in Integer
There are only public API items currently in I/O Formats
validate_proto NOTE: validate_proto is experimental and may change or be removed without notice.
This function performs syntax checking on a prototype, proto. If warn is true, any illegal characters or mismatched brackets will trigger illegalproto warnings, declaring that they were detected in the prototype for name.
The return value is true if this is a valid prototype, and false if it is not, regardless of whether warn was true or false.
Note that NULL is a valid proto and will always return true.
bool validate_proto(SV *name, SV *proto, bool warn,
bool curstash)There are only public API items currently in Locales
magic_clearhint Triggered by a delete from %^H, records the key to PL_compiling.cop_hints_hash.
int magic_clearhint(SV* sv, MAGIC* mg)magic_clearhints Triggered by clearing %^H, resets PL_compiling.cop_hints_hash.
int magic_clearhints(SV* sv, MAGIC* mg)magic_methcall Invoke a magic method (like FETCH).
sv and mg are the tied thingy and the tie magic.
meth is the name of the method to call.
argc is the number of args (in addition to $self) to pass to the method.
The flags can be:
G_DISCARD invoke method with G_DISCARD flag and don't
return a value
G_UNDEF_FILL fill the stack with argc pointers to
PL_sv_undefThe arguments themselves are any values following the flags argument.
Returns the SV (if any) returned by the method, or NULL on failure.
NOTE: magic_methcall must be explicitly called as Perl_magic_methcall with an aTHX_ parameter.
SV* Perl_magic_methcall(pTHX_ SV *sv, const MAGIC *mg, SV *meth,
U32 flags, U32 argc, ...)magic_sethint Triggered by a store to %^H, records the key/value pair to PL_compiling.cop_hints_hash. It is assumed that hints aren't storing anything that would need a deep copy. Maybe we should warn if we find a reference.
int magic_sethint(SV* sv, MAGIC* mg)mg_dup Duplicate a chain of magic, returning a pointer to the cloned object.
MAGIC* mg_dup(MAGIC *mg, CLONE_PARAMS *const param)mg_localize Copy some of the magic from an existing SV to new localized version of that SV. Container magic (e.g., %ENV, $1, tie) gets copied, value magic doesn't (e.g., taint, pos).
If setmagic is false then no set magic will be called on the new (empty) SV. This typically means that assignment will soon follow (e.g. 'local $x = $y'), and that will handle the magic.
void mg_localize(SV* sv, SV* nsv, bool setmagic)si_dup Duplicate a stack info structure, returning a pointer to the cloned object.
PERL_SI* si_dup(PERL_SI* si, CLONE_PARAMS* param)ss_dup Duplicate the save stack, returning a pointer to the cloned object.
ANY* ss_dup(PerlInterpreter* proto_perl, CLONE_PARAMS* param)calloc Implements "Newxz" in perlapi which you should use instead.
NOTE: calloc must be explicitly called as Perl_calloc .
Malloc_t Perl_calloc(MEM_SIZE elements, MEM_SIZE size)malloc Implements "Newx" in perlapi which you should use instead.
NOTE: malloc must be explicitly called as Perl_malloc .
Malloc_t Perl_malloc(MEM_SIZE nbytes)mfree Implements "Safefree" in perlapi which you should use instead.
NOTE: mfree must be explicitly called as Perl_mfree .
Free_t Perl_mfree(Malloc_t where)realloc Implements "Renew" in perlapi which you should use instead.
NOTE: realloc must be explicitly called as Perl_realloc .
Malloc_t Perl_realloc(Malloc_t where, MEM_SIZE nbytes)mro_get_linear_isa_dfs Returns the Depth-First Search linearization of @ISA the given stash. The return value is a read-only AV*. level should be 0 (it is used internally in this function's recursion).
You are responsible for SvREFCNT_inc() on the return value if you plan to store it anywhere semi-permanently (otherwise it might be deleted out from under you the next time the cache is invalidated).
AV* mro_get_linear_isa_dfs(HV* stash, U32 level)mro_isa_changed_in Takes the necessary steps (cache invalidations, mostly) when the @ISA of the given package has changed. Invoked by the setisa magic, should not need to invoke directly.
void mro_isa_changed_in(HV* stash)mro_package_moved Call this function to signal to a stash that it has been assigned to another spot in the stash hierarchy. stash is the stash that has been assigned. oldstash is the stash it replaces, if any. gv is the glob that is actually being assigned to.
This can also be called with a null first argument to indicate that oldstash has been deleted.
This function invalidates isa caches on the old stash, on all subpackages nested inside it, and on the subclasses of all those, including non-existent packages that have corresponding entries in stash.
It also sets the effective names (HvENAME) on all the stashes as appropriate.
If the gv is present and is not in the symbol table, then this function simply returns. This checked will be skipped if flags & 1.
void mro_package_moved(HV * const stash, HV * const oldstash,
const GV * const gv, U32 flags)There are only public API items currently in Multicall Functions
isinfnansv Checks whether the argument would be either an infinity or NaN when used as a number, but is careful not to trigger non-numeric or uninitialized warnings. it assumes the caller has done SvGETMAGIC(sv) already.
Note that this always accepts trailing garbage (similar to grok_number_flags with PERL_SCAN_TRAILING), so "inferior" and "NAND gates" will return true.
bool isinfnansv(SV *sv)finalize_optree This function finalizes the optree. Should be called directly after the complete optree is built. It does some additional checking which can't be done in the normal ck_xxx functions and makes the tree thread-safe.
void finalize_optree(OP* o)newATTRSUB_x Construct a Perl subroutine, also performing some surrounding jobs.
This function is expected to be called in a Perl compilation context, and some aspects of the subroutine are taken from global variables associated with compilation. In particular, PL_compcv represents the subroutine that is currently being compiled. It must be non-null when this function is called, and some aspects of the subroutine being constructed are taken from it. The constructed subroutine may actually be a reuse of the PL_compcv object, but will not necessarily be so.
If block is null then the subroutine will have no body, and for the time being it will be an error to call it. This represents a forward subroutine declaration such as sub foo ($$);. If block is non-null then it provides the Perl code of the subroutine body, which will be executed when the subroutine is called. This body includes any argument unwrapping code resulting from a subroutine signature or similar. The pad use of the code must correspond to the pad attached to PL_compcv. The code is not expected to include a leavesub or leavesublv op; this function will add such an op. block is consumed by this function and will become part of the constructed subroutine.
proto specifies the subroutine's prototype, unless one is supplied as an attribute (see below). If proto is null, then the subroutine will not have a prototype. If proto is non-null, it must point to a const op whose value is a string, and the subroutine will have that string as its prototype. If a prototype is supplied as an attribute, the attribute takes precedence over proto, but in that case proto should preferably be null. In any case, proto is consumed by this function.
attrs supplies attributes to be applied the subroutine. A handful of attributes take effect by built-in means, being applied to PL_compcv immediately when seen. Other attributes are collected up and attached to the subroutine by this route. attrs may be null to supply no attributes, or point to a const op for a single attribute, or point to a list op whose children apart from the pushmark are const ops for one or more attributes. Each const op must be a string, giving the attribute name optionally followed by parenthesised arguments, in the manner in which attributes appear in Perl source. The attributes will be applied to the sub by this function. attrs is consumed by this function.
If o_is_gv is false and o is null, then the subroutine will be anonymous. If o_is_gv is false and o is non-null, then o must point to a const OP, which will be consumed by this function, and its string value supplies a name for the subroutine. The name may be qualified or unqualified, and if it is unqualified then a default stash will be selected in some manner. If o_is_gv is true, then o doesn't point to an OP at all, but is instead a cast pointer to a GV by which the subroutine will be named.
If there is already a subroutine of the specified name, then the new sub will either replace the existing one in the glob or be merged with the existing one. A warning may be generated about redefinition.
If the subroutine has one of a few special names, such as BEGIN or END, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of BEGIN, the subroutine will be executed and the reference to it disposed of before this function returns.
The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a BEGIN subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies.
CV* newATTRSUB_x(I32 floor, OP *o, OP *proto, OP *attrs,
OP *block, bool o_is_gv)newXS_len_flags Construct an XS subroutine, also performing some surrounding jobs.
The subroutine will have the entry point subaddr. It will have the prototype specified by the nul-terminated string proto, or no prototype if proto is null. The prototype string is copied; the caller can mutate the supplied string afterwards. If filename is non-null, it must be a nul-terminated filename, and the subroutine will have its CvFILE set accordingly. By default CvFILE is set to point directly to the supplied string, which must be static. If flags has the XS_DYNAMIC_FILENAME bit set, then a copy of the string will be taken instead.
Other aspects of the subroutine will be left in their default state. If anything else needs to be done to the subroutine for it to function correctly, it is the caller's responsibility to do that after this function has constructed it. However, beware of the subroutine potentially being destroyed before this function returns, as described below.
If name is null then the subroutine will be anonymous, with its CvGV referring to an __ANON__ glob. If name is non-null then the subroutine will be named accordingly, referenced by the appropriate glob. name is a string of length len bytes giving a sigilless symbol name, in UTF-8 if flags has the SVf_UTF8 bit set and in Latin-1 otherwise. The name may be either qualified or unqualified, with the stash defaulting in the same manner as for gv_fetchpvn_flags. flags may contain flag bits understood by gv_fetchpvn_flags with the same meaning as they have there, such as GV_ADDWARN. The symbol is always added to the stash if necessary, with GV_ADDMULTI semantics.
If there is already a subroutine of the specified name, then the new sub will replace the existing one in the glob. A warning may be generated about the redefinition. If the old subroutine was CvCONST then the decision about whether to warn is influenced by an expectation about whether the new subroutine will become a constant of similar value. That expectation is determined by const_svp. (Note that the call to this function doesn't make the new subroutine CvCONST in any case; that is left to the caller.) If const_svp is null then it indicates that the new subroutine will not become a constant. If const_svp is non-null then it indicates that the new subroutine will become a constant, and it points to an SV* that provides the constant value that the subroutine will have.
If the subroutine has one of a few special names, such as BEGIN or END, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of BEGIN, the subroutine will be executed and the reference to it disposed of before this function returns, and also before its prototype is set. If a BEGIN subroutine would not be sufficiently constructed by this function to be ready for execution then the caller must prevent this happening by giving the subroutine a different name.
The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a BEGIN subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies.
CV * newXS_len_flags(const char *name, STRLEN len,
XSUBADDR_t subaddr,
const char *const filename,
const char *const proto, SV **const_svp,
U32 flags)op_refcnt_lock Implements the OP_REFCNT_LOCK macro which you should use instead.
void op_refcnt_lock()op_refcnt_unlock Implements the OP_REFCNT_UNLOCK macro which you should use instead.
void op_refcnt_unlock()optimize_optree This function applies some optimisations to the optree in top-down order. It is called before the peephole optimizer, which processes ops in execution order. Note that finalize_optree() also does a top-down scan, but is called *after* the peephole optimizer.
void optimize_optree(OP* o)traverse_op_tree Return the next op in a depth-first traversal of the op tree, returning NULL when the traversal is complete.
The initial call must supply the root of the tree as both top and o.
For now it's static, but it may be exposed to the API in the future.
OP* traverse_op_tree(OP* top, OP* o)There are only public API items currently in Pack and Unpack
CX_CURPAD_SAVE Save the current pad in the given context block structure.
void CX_CURPAD_SAVE(struct context)CX_CURPAD_SV Access the SV at offset po in the saved current pad in the given context block structure (can be used as an lvalue).
SV * CX_CURPAD_SV(struct context, PADOFFSET po)PAD_BASE_SV Get the value from slot po in the base (DEPTH=1) pad of a padlist
SV * PAD_BASE_SV(PADLIST padlist, PADOFFSET po)PAD_CLONE_VARS Clone the state variables associated with running and compiling pads.
void PAD_CLONE_VARS(PerlInterpreter *proto_perl,
CLONE_PARAMS* param)PAD_COMPNAME_FLAGS Return the flags for the current compiling pad name at offset po. Assumes a valid slot entry.
U32 PAD_COMPNAME_FLAGS(PADOFFSET po)PAD_COMPNAME_GEN The generation number of the name at offset po in the current compiling pad (lvalue).
STRLEN PAD_COMPNAME_GEN(PADOFFSET po)PAD_COMPNAME_GEN_set Sets the generation number of the name at offset po in the current ling pad (lvalue) to gen.
STRLEN PAD_COMPNAME_GEN_set(PADOFFSET po, int gen)PAD_COMPNAME_OURSTASH Return the stash associated with an our variable. Assumes the slot entry is a valid our lexical.
HV * PAD_COMPNAME_OURSTASH(PADOFFSET po)PAD_COMPNAME_PV Return the name of the current compiling pad name at offset po. Assumes a valid slot entry.
char * PAD_COMPNAME_PV(PADOFFSET po)PAD_COMPNAME_TYPE Return the type (stash) of the current compiling pad name at offset po. Must be a valid name. Returns null if not typed.
HV * PAD_COMPNAME_TYPE(PADOFFSET po)PadnameIsOUR Whether this is an "our" variable.
bool PadnameIsOUR(PADNAME * pn)PadnameIsSTATE Whether this is a "state" variable.
bool PadnameIsSTATE(PADNAME * pn)PadnameOURSTASH The stash in which this "our" variable was declared.
HV * PadnameOURSTASH(PADNAME * pn)PadnameOUTER Whether this entry belongs to an outer pad. Entries for which this is true are often referred to as 'fake'.
bool PadnameOUTER(PADNAME * pn)PadnameTYPE The stash associated with a typed lexical. This returns the %Foo:: hash for my Foo $bar.
HV * PadnameTYPE(PADNAME * pn)PAD_RESTORE_LOCAL Restore the old pad saved into the local variable opad by PAD_SAVE_LOCAL()
void PAD_RESTORE_LOCAL(PAD *opad)PAD_SAVE_LOCAL Save the current pad to the local variable opad, then make the current pad equal to npad
void PAD_SAVE_LOCAL(PAD *opad, PAD *npad)PAD_SAVE_SETNULLPAD Save the current pad then set it to null.
void PAD_SAVE_SETNULLPAD()PAD_SETSV Set the slot at offset po in the current pad to sv
SV * PAD_SETSV(PADOFFSET po, SV* sv)PAD_SET_CUR Set the current pad to be pad n in the padlist, saving the previous current pad. NB currently this macro expands to a string too long for some compilers, so it's best to replace it with
SAVECOMPPAD();
PAD_SET_CUR_NOSAVE(padlist,n);void PAD_SET_CUR(PADLIST padlist, I32 n)PAD_SET_CUR_NOSAVE like PAD_SET_CUR, but without the save
void PAD_SET_CUR_NOSAVE(PADLIST padlist, I32 n)PAD_SV Get the value at offset po in the current pad
SV * PAD_SV(PADOFFSET po)PAD_SVl Lightweight and lvalue version of PAD_SV. Get or set the value at offset po in the current pad. Unlike PAD_SV, does not print diagnostics with -DX. For internal use only.
SV * PAD_SVl(PADOFFSET po)SAVECLEARSV Clear the pointed to pad value on scope exit. (i.e. the runtime action of my)
void SAVECLEARSV(SV **svp)SAVECOMPPAD save PL_comppad and PL_curpad
void SAVECOMPPAD()SAVEPADSV Save a pad slot (used to restore after an iteration)
void SAVEPADSV(PADOFFSET po)There are only public API items currently in Password and Group access
There are only public API items currently in Paths to system commands
There are only public API items currently in Prototype information
regnodeDescribed in perlreguts.
There are only public API items currently in Reports and Formats
There are only public API items currently in Signals
There are only public API items currently in Site configuration
There are only public API items currently in Sockets configuration values
There are only public API items currently in Source Filters
djSP Declare Just SP. This is actually identical to dSP, and declares a local copy of perl's stack pointer, available via the SP macro. See "SP" in perlapi. (Available for backward source code compatibility with the old (Perl 5.005) thread model.)
djSP();LVRET True if this op will be the return value of an lvalue subroutine
save_alloc Implements "SSNEW" in perlapi and kin, which should be used instead of this function.
I32 save_alloc(I32 size, I32 pad)delimcpy_no_escape Copy a source buffer to a destination buffer, stopping at (but not including) the first occurrence in the source of the delimiter byte, delim. The source is the bytes between from and from_end - 1. Similarly, the dest is to up to to_end.
The number of bytes copied is written to *retlen.
Returns the position of delim in the from buffer, but if there is no such occurrence before from_end, then from_end is returned, and the entire buffer from .. from_end - 1 is copied.
If there is room in the destination available after the copy, an extra terminating safety NUL byte is appended (not included in the returned length).
The error case is if the destination buffer is not large enough to accommodate everything that should be copied. In this situation, a value larger than to_end - to is written to *retlen, and as much of the source as fits will be written to the destination. Not having room for the safety NUL is not considered an error.
char* delimcpy_no_escape(char* to, const char* to_end,
const char* from, const char* from_end,
const int delim, I32* retlen)my_cxt_init Implements the "MY_CXT_INIT" in perlxs macro, which you should use instead.
The first time a module is loaded, the global PL_my_cxt_index is incremented, and that value is assigned to that module's static my_cxt_index (whose address is passed as an arg). Then, for each interpreter this function is called for, it makes sure a void* slot is available to hang the static data off, by allocating or extending the interpreter's PL_my_cxt_list array
NOTE: my_cxt_init must be explicitly called as Perl_my_cxt_init with an aTHX_ parameter.
void* Perl_my_cxt_init(pTHX_ int *indexp, size_t size)quadmath_format_needed quadmath_format_needed() returns true if the format string seems to contain at least one non-Q-prefixed %[efgaEFGA] format specifier, or returns false otherwise.
The format specifier detection is not complete printf-syntax detection, but it should catch most common cases.
If true is returned, those arguments should in theory be processed with quadmath_snprintf(), but in case there is more than one such format specifier (see "quadmath_format_valid"), and if there is anything else beyond that one (even just a single byte), they cannot be processed because quadmath_snprintf() is very strict, accepting only one format spec, and nothing else. In this case, the code should probably fail.
bool quadmath_format_needed(const char* format)quadmath_format_valid quadmath_snprintf() is very strict about its format string and will fail, returning -1, if the format is invalid. It accepts exactly one format spec.
quadmath_format_valid() checks that the intended single spec looks sane: begins with %, has only one %, ends with [efgaEFGA], and has Q before it. This is not a full "printf syntax check", just the basics.
Returns true if it is valid, false if not.
See also "quadmath_format_needed".
bool quadmath_format_valid(const char* format)SVt_INVLIST Type flag for scalars. See "svtype" in perlapi.
PL_Sv A scratch pad SV for whatever temporary use you need. Chiefly used as a fallback by macros on platforms where "PERL_USE_GCC_BRACE_GROUPS" in perlapi> is unavailable, and which would otherwise evaluate their SV parameter more than once.
PL_Svsv_2bool This macro is only used by sv_true() or its macro equivalent, and only if the latter's argument is neither SvPOK, SvIOK nor SvNOK. It calls sv_2bool_flags with the SV_GMAGIC flag.
bool sv_2bool(SV *const sv)sv_2bool_flags This function is only used by sv_true() and friends, and only if the latter's argument is neither SvPOK, SvIOK nor SvNOK. If the flags contain SV_GMAGIC, then it does an mg_get() first.
bool sv_2bool_flags(SV *sv, I32 flags)sv_2num NOTE: sv_2num is experimental and may change or be removed without notice.
Return an SV with the numeric value of the source SV, doing any necessary reference or overload conversion. The caller is expected to have handled get-magic already.
SV* sv_2num(SV *const sv)sv_2pvbyte_nolen Return a pointer to the byte-encoded representation of the SV. May cause the SV to be downgraded from UTF-8 as a side-effect.
Usually accessed via the SvPVbyte_nolen macro.
char* sv_2pvbyte_nolen(SV* sv)sv_2pvutf8_nolen Return a pointer to the UTF-8-encoded representation of the SV. May cause the SV to be upgraded to UTF-8 as a side-effect.
Usually accessed via the SvPVutf8_nolen macro.
char* sv_2pvutf8_nolen(SV* sv)sv_2pv_nolen Like sv_2pv(), but doesn't return the length too. You should usually use the macro wrapper SvPV_nolen(sv) instead.
char* sv_2pv_nolen(SV* sv)sv_add_arena Given a chunk of memory, link it to the head of the list of arenas, and split it into a list of free SVs.
void sv_add_arena(char *const ptr, const U32 size,
const U32 flags)sv_clean_all Decrement the refcnt of each remaining SV, possibly triggering a cleanup. This function may have to be called multiple times to free SVs which are in complex self-referential hierarchies.
I32 sv_clean_all()sv_clean_objs Attempt to destroy all objects not yet freed.
void sv_clean_objs()sv_free_arenas Deallocate the memory used by all arenas. Note that all the individual SV heads and bodies within the arenas must already have been freed.
void sv_free_arenas()sv_grow Expands the character buffer in the SV. If necessary, uses sv_unref and upgrades the SV to SVt_PV. Returns a pointer to the character buffer. Use the SvGROW wrapper instead.
char* sv_grow(SV *const sv, STRLEN newlen)sv_grow_fresh A cut-down version of sv_grow intended only for when sv is a freshly-minted SVt_PV, SVt_PVIV, SVt_PVNV, or SVt_PVMG. i.e. sv has the default flags, has never been any other type, and does not have an existing string. Basically, just assigns a char buffer and returns a pointer to it.
char* sv_grow_fresh(SV *const sv, STRLEN newlen)sv_iv DEPRECATED! It is planned to remove sv_iv from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvIVx macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
IV sv_iv(SV* sv)sv_newref Increment an SV's reference count. Use the SvREFCNT_inc() wrapper instead.
SV* sv_newref(SV *const sv)sv_nv DEPRECATED! It is planned to remove sv_nv from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvNVx macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
NV sv_nv(SV* sv)sv_pv Use the SvPV_nolen macro instead
char* sv_pv(SV *sv)sv_pvbyte Use SvPVbyte_nolen instead.
char* sv_pvbyte(SV *sv)sv_pvbyten DEPRECATED! It is planned to remove sv_pvbyten from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvPVbyte macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
char* sv_pvbyten(SV *sv, STRLEN *lp)sv_pvbyten_force The backend for the SvPVbytex_force macro. Always use the macro instead. If the SV cannot be downgraded from UTF-8, this croaks.
char* sv_pvbyten_force(SV *const sv, STRLEN *const lp)sv_pvn DEPRECATED! It is planned to remove sv_pvn from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvPV macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
char* sv_pvn(SV *sv, STRLEN *lp)sv_pvn_force Get a sensible string out of the SV somehow. A private implementation of the SvPV_force macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
char* sv_pvn_force(SV* sv, STRLEN* lp)sv_pvutf8 Use the SvPVutf8_nolen macro instead
char* sv_pvutf8(SV *sv)sv_pvutf8n DEPRECATED! It is planned to remove sv_pvutf8n from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvPVutf8 macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
char* sv_pvutf8n(SV *sv, STRLEN *lp)sv_pvutf8n_force The backend for the SvPVutf8x_force macro. Always use the macro instead.
char* sv_pvutf8n_force(SV *const sv, STRLEN *const lp)sv_tainted Test an SV for taintedness. Use SvTAINTED instead.
bool sv_tainted(SV *const sv)SvTHINKFIRST A quick flag check to see whether an sv should be passed to sv_force_normal to be "downgraded" before SvIVX or SvPVX can be modified directly.
For example, if your scalar is a reference and you want to modify the SvIVX slot, you can't just do SvROK_off, as that will leak the referent.
This is used internally by various sv-modifying functions, such as sv_setsv, sv_setiv and sv_pvn_force.
One case that this does not handle is a gv without SvFAKE set. After
if (SvTHINKFIRST(gv)) sv_force_normal(gv);it will still be a gv.
SvTHINKFIRST sometimes produces false positives. In those cases sv_force_normal does nothing.
U32 SvTHINKFIRST(SV *sv)sv_true Returns true if the SV has a true value by Perl's rules. Use the SvTRUE macro instead, which may call sv_true() or may instead use an in-line version.
I32 sv_true(SV *const sv)sv_untaint Untaint an SV. Use SvTAINTED_off instead.
void sv_untaint(SV *const sv)sv_uv DEPRECATED! It is planned to remove sv_uv from a future release of Perl. Do not use it for new code; remove it from existing code.
A private implementation of the SvUVx macro for compilers which can't cope with complex macro expressions. Always use the macro instead.
UV sv_uv(SV* sv)sv_taint Taint an SV. Use SvTAINTED_on instead.
void sv_taint(SV* sv)TAINT If we aren't in taint checking mode, do nothing; otherwise indicate to "TAINT_set" and "TAINT_PROPER" that some unspecified element is tainted.
void TAINT()TAINT_ENV Looks at several components of %ENV for taintedness, and calls "taint_proper" if any are tainted. The components it searches are things like $PATH.
void TAINT_ENVtaint_env Implements the "TAINT_ENV" macro, which you should generally use instead.
void taint_env()TAINT_get Returns a boolean as to whether some element is tainted or not.
bool TAINT_get()TAINT_IF If c evaluates to true, call "TAINT" to indicate that something is tainted; otherwise do nothing.
void TAINT_IF(bool c)TAINTING_get Returns a boolean as to whether taint checking is enabled or not.
bool TAINTING_get()TAINTING_set Turn taint checking mode off/on
void TAINTING_set(bool s)TAINT_NOT Remove any taintedness previously set by, e.g., TAINT.
void TAINT_NOT()TAINT_PROPER If no element is tainted, do nothing; otherwise output a message (containing s) that indicates there is a tainting violation. If such violations are fatal, it croaks.
void TAINT_PROPER(const char * s)taint_proper Implements the "TAINT_PROPER" macro, which you should generally use instead.
void taint_proper(const char* f, const char *const s)TAINT_set If s is true, "TAINT_get" returns true; If s is false, "TAINT_get" returns false;
void TAINT_set(bool s)TAINT_WARN_get Returns false if tainting violations are fatal; Returns true if they're just warnings
bool TAINT_WARN_get()TAINT_WARN_set s being true indicates "TAINT_WARN_get" should return that tainting violations are just warnings
s being false indicates "TAINT_WARN_get" should return that tainting violations are fatal.
void TAINT_WARN_set(bool s)There are only public API items currently in Time
There are only public API items currently in Typedef names
bytes_from_utf8_loc NOTE: bytes_from_utf8_loc is experimental and may change or be removed without notice.
Like "bytes_from_utf8" in perlapi(), but takes an extra parameter, a pointer to where to store the location of the first character in "s" that cannot be converted to non-UTF8.
If that parameter is NULL, this function behaves identically to bytes_from_utf8.
Otherwise if *is_utf8p is 0 on input, the function behaves identically to bytes_from_utf8, except it also sets *first_non_downgradable to NULL.
Otherwise, the function returns a newly created NUL-terminated string containing the non-UTF8 equivalent of the convertible first portion of "s". *lenp is set to its length, not including the terminating NUL. If the entire input string was converted, *is_utf8p is set to a FALSE value, and *first_non_downgradable is set to NULL.
Otherwise, *first_non_downgradable is set to point to the first byte of the first character in the original string that wasn't converted. *is_utf8p is unchanged. Note that the new string may have length 0.
Another way to look at it is, if *first_non_downgradable is non-NULL and *is_utf8p is TRUE, this function starts at the beginning of "s" and converts as many characters in it as possible stopping at the first one it finds that can't be converted to non-UTF-8. *first_non_downgradable is set to point to that. The function returns the portion that could be converted in a newly created NUL-terminated string, and *lenp is set to its length, not including the terminating NUL. If the very first character in the original could not be converted, *lenp will be 0, and the new string will contain just a single NUL. If the entire input string was converted, *is_utf8p is set to FALSE and *first_non_downgradable is set to NULL.
Upon successful return, the number of variants in the converted portion of the string can be computed by having saved the value of *lenp before the call, and subtracting the after-call value of *lenp from it.
U8* bytes_from_utf8_loc(const U8 *s, STRLEN *lenp,
bool *is_utf8p,
const U8 ** first_unconverted)find_uninit_var NOTE: find_uninit_var is experimental and may change or be removed without notice.
Find the name of the undefined variable (if any) that caused the operator to issue a "Use of uninitialized value" warning. If match is true, only return a name if its value matches uninit_sv. So roughly speaking, if a unary operator (such as OP_COS) generates a warning, then following the direct child of the op may yield an OP_PADSV or OP_GV that gives the name of the undefined variable. On the other hand, with OP_ADD there are two branches to follow, so we only print the variable name if we get an exact match. desc_p points to a string pointer holding the description of the op. This may be updated if needed.
The name is returned as a mortal SV.
Assumes that PL_op is the OP that originally triggered the error, and that PL_comppad/PL_curpad points to the currently executing pad.
SV* find_uninit_var(const OP *const obase,
const SV *const uninit_sv, bool match,
const char **desc_p)isSCRIPT_RUN Returns a bool as to whether or not the sequence of bytes from s up to but not including send form a "script run". utf8_target is TRUE iff the sequence starting at s is to be treated as UTF-8. To be precise, except for two degenerate cases given below, this function returns TRUE iff all code points in it come from any combination of three "scripts" given by the Unicode "Script Extensions" property: Common, Inherited, and possibly one other. Additionally all decimal digits must come from the same consecutive sequence of 10.
For example, if all the characters in the sequence are Greek, or Common, or Inherited, this function will return TRUE, provided any decimal digits in it are from the same block of digits in Common. (These are the ASCII digits "0".."9" and additionally a block for full width forms of these, and several others used in mathematical notation.) For scripts (unlike Greek) that have their own digits defined this will accept either digits from that set or from one of the Common digit sets, but not a combination of the two. Some scripts, such as Arabic, have more than one set of digits. All digits must come from the same set for this function to return TRUE.
*ret_script, if ret_script is not NULL, will on return of TRUE contain the script found, using the SCX_enum typedef. Its value will be SCX_INVALID if the function returns FALSE.
If the sequence is empty, TRUE is returned, but *ret_script (if asked for) will be SCX_INVALID.
If the sequence contains a single code point which is unassigned to a character in the version of Unicode being used, the function will return TRUE, and the script will be SCX_Unknown. Any other combination of unassigned code points in the input sequence will result in the function treating the input as not being a script run.
The returned script will be SCX_Inherited iff all the code points in it are from the Inherited script.
Otherwise, the returned script will be SCX_Common iff all the code points in it are from the Inherited or Common scripts.
bool isSCRIPT_RUN(const U8 *s, const U8 *send,
const bool utf8_target)is_utf8_non_invariant_string Returns TRUE if "is_utf8_invariant_string" in perlapi returns FALSE for the first len bytes of the string s, but they are, nonetheless, legal Perl-extended UTF-8; otherwise returns FALSE.
A TRUE return means that at least one code point represented by the sequence either is a wide character not representable as a single byte, or the representation differs depending on whether the sequence is encoded in UTF-8 or not.
See also "is_utf8_invariant_string" in perlapi, "is_utf8_string" in perlapi
bool is_utf8_non_invariant_string(const U8* const s, STRLEN len)report_uninit Print appropriate "Use of uninitialized variable" warning.
void report_uninit(const SV *uninit_sv)utf8n_to_uvuni DEPRECATED! It is planned to remove utf8n_to_uvuni from a future release of Perl. Do not use it for new code; remove it from existing code.
Instead use "utf8_to_uvchr_buf" in perlapi, or rarely, "utf8n_to_uvchr" in perlapi.
This function was useful for code that wanted to handle both EBCDIC and ASCII platforms with Unicode properties, but starting in Perl v5.20, the distinctions between the platforms have mostly been made invisible to most code, so this function is quite unlikely to be what you want. If you do need this precise functionality, use instead NATIVE_TO_UNI(utf8_to_uvchr_buf(...)) or NATIVE_TO_UNI(utf8n_to_uvchr(...)).
UV utf8n_to_uvuni(const U8 *s, STRLEN curlen, STRLEN *retlen,
U32 flags)utf8_to_uvuni DEPRECATED! It is planned to remove utf8_to_uvuni from a future release of Perl. Do not use it for new code; remove it from existing code.
Returns the Unicode code point of the first character in the string s which is assumed to be in UTF-8 encoding; retlen will be set to the length, in bytes, of that character.
Some, but not all, UTF-8 malformations are detected, and in fact, some malformed input could cause reading beyond the end of the input buffer, which is one reason why this function is deprecated. The other is that only in extremely limited circumstances should the Unicode versus native code point be of any interest to you. See "utf8_to_uvuni_buf" for alternatives.
If s points to one of the detected malformations, and UTF8 warnings are enabled, zero is returned and *retlen is set (if retlen doesn't point to NULL) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and *retlen is set (if retlen isn't NULL) so that (s + *retlen) is the next possible position in s that could begin a non-malformed character. See "utf8n_to_uvchr" in perlapi for details on when the REPLACEMENT CHARACTER is returned.
UV utf8_to_uvuni(const U8 *s, STRLEN *retlen)utf8_to_uvuni_buf DEPRECATED! It is planned to remove utf8_to_uvuni_buf from a future release of Perl. Do not use it for new code; remove it from existing code.
Only in very rare circumstances should code need to be dealing in Unicode (as opposed to native) code points. In those few cases, use NATIVE_TO_UNI(utf8_to_uvchr_buf(...)) instead. If you are not absolutely sure this is one of those cases, then assume it isn't and use plain utf8_to_uvchr_buf instead.
Returns the Unicode (not-native) code point of the first character in the string s which is assumed to be in UTF-8 encoding; send points to 1 beyond the end of s. retlen will be set to the length, in bytes, of that character.
If s does not point to a well-formed UTF-8 character and UTF8 warnings are enabled, zero is returned and *retlen is set (if retlen isn't NULL) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and *retlen is set (if retlen isn't NULL) so that (s + *retlen) is the next possible position in s that could begin a non-malformed character. See "utf8n_to_uvchr" in perlapi for details on when the REPLACEMENT CHARACTER is returned.
UV utf8_to_uvuni_buf(const U8 *s, const U8 *send, STRLEN *retlen)uvoffuni_to_utf8_flags THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Instead, Almost all code should use "uvchr_to_utf8" in perlapi or "uvchr_to_utf8_flags" in perlapi.
This function is like them, but the input is a strict Unicode (as opposed to native) code point. Only in very rare circumstances should code not be using the native code point.
For details, see the description for "uvchr_to_utf8_flags" in perlapi.
U8* uvoffuni_to_utf8_flags(U8 *d, UV uv, UV flags)uvuni_to_utf8_flags DEPRECATED! It is planned to remove uvuni_to_utf8_flags from a future release of Perl. Do not use it for new code; remove it from existing code.
Instead you almost certainly want to use "uvchr_to_utf8" in perlapi or "uvchr_to_utf8_flags" in perlapi.
This function is a deprecated synonym for "uvoffuni_to_utf8_flags", which itself, while not deprecated, should be used only in isolated circumstances. These functions were useful for code that wanted to handle both EBCDIC and ASCII platforms with Unicode properties, but starting in Perl v5.20, the distinctions between the platforms have mostly been made invisible to most code, so this function is quite unlikely to be what you want.
U8* uvuni_to_utf8_flags(U8 *d, UV uv, UV flags)valid_utf8_to_uvchr Like "utf8_to_uvchr_buf" in perlapi, but should only be called when it is known that the next character in the input UTF-8 string s is well-formed (e.g., it passes "isUTF8_CHAR" in perlapi. Surrogates, non-character code points, and non-Unicode code points are allowed.
UV valid_utf8_to_uvchr(const U8 *s, STRLEN *retlen)variant_under_utf8_count This function looks at the sequence of bytes between s and e, which are assumed to be encoded in ASCII/Latin1, and returns how many of them would change should the string be translated into UTF-8. Due to the nature of UTF-8, each of these would occupy two bytes instead of the single one in the input string. Thus, this function returns the precise number of bytes the string would expand by when translated to UTF-8.
Unlike most of the other functions that have utf8 in their name, the input to this function is NOT a UTF-8-encoded string. The function name is slightly odd to emphasize this.
This function is internal to Perl because khw thinks that any XS code that would want this is probably operating too close to the internals. Presenting a valid use case could change that.
See also "is_utf8_invariant_string" in perlapi and "is_utf8_invariant_string_loc" in perlapi,
Size_t variant_under_utf8_count(const U8* const s,
const U8* const e)my_popen_list Implementing function on some systems for PerlProc_popen_list()
PerlIO* my_popen_list(const char* mode, int n, SV ** args)my_socketpair Emulates socketpair(2) on systems that don't have it, but which do have enough functionality for the emulation.
int my_socketpair(int family, int type, int protocol, int fd[2])There are only public API items currently in Versioning
PL_dowarn The C variable that roughly corresponds to Perl's $^W warning variable. However, $^W is treated as a boolean, whereas PL_dowarn is a collection of flag bits.
On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.
U8 PL_dowarnThere are only public API items currently in XS
The following functions are currently undocumented. If you use one of them, you may wish to consider creating and submitting documentation for it.
abort_execution
add_cp_to_invlist
_add_range_to_invlist
alloc_LOGOP
allocmy
amagic_cmp
amagic_cmp_desc
amagic_cmp_locale
amagic_cmp_locale_desc
amagic_is_enabled
amagic_i_ncmp
amagic_i_ncmp_desc
amagic_ncmp
amagic_ncmp_desc
any_dup
append_utf8_from_native_byte
apply
ASCII_TO_NEED
atfork_lock
atfork_unlock
av_arylen_p
av_extend_guts
av_iter_p
av_nonelem
av_reify
bind_match
block_gimme
boot_core_builtin
boot_core_mro
boot_core_PerlIO
boot_core_UNIVERSAL
_byte_dump_string
call_list
cando
cast_i32
cast_iv
cast_ulong
cast_uv
check_utf8_print
ck_anoncode
ck_backtick
ck_bitop
ck_cmp
ck_concat
ck_defined
ck_delete
ck_each
ck_entersub_args_core
ck_eof
ck_eval
ck_exec
ck_exists
ck_ftst
ck_fun
ck_glob
ck_grep
ck_index
ck_isa
ck_join
ck_length
ck_lfun
ck_listiob
ck_match
ck_method
ck_null
ck_open
ck_prototype
ck_readline
ck_refassign
ck_repeat
ck_require
ck_return
ck_rfun
ck_rvconst
ck_sassign
ck_select
ck_shift
ck_smartmatch
ck_sort
ck_spair
ck_split
ck_stringify
ck_subr
ck_substr
ck_svconst
ck_tell
ck_trunc
ck_trycatch
ckwarn
ckwarn_d
clear_defarray
closest_cop
cmpchain_extend
cmpchain_finish
cmpchain_start
cmp_desc
cmp_locale_desc
cntrl_to_mnemonic
cop_file_avn
coresub_op
create_eval_scope
croak_caller
croak_memory_wrap
croak_no_mem
croak_popstack
csighandler
csighandler1
csighandler3
current_re_engine
custom_op_get_field
cv_ckproto_len_flags
cv_clone_into
cv_const_sv_or_av
cvgv_from_hek
cvgv_set
cvstash_set
cv_undef_flags
cx_dump
cx_dup
cxinc
cx_popblock
cx_popeval
cx_popformat
cx_popgiven
cx_poploop
cx_popsub
cx_popsub_args
cx_popsub_common
cx_popwhen
cx_pushblock
cx_pusheval
cx_pushformat
cx_pushgiven
cx_pushloop_for
cx_pushloop_plain
cx_pushsub
cx_pushtry
cx_pushwhen
cx_topblock
debstackptrs
deb_stack_all
debug_hash_seed
defelem_target
delete_eval_scope
despatch_signals
die_unwind
do_aexec
do_aexec5
do_aspawn
do_eof
does_utf8_overflow
do_exec
do_exec3
dofile
do_gvgv_dump
do_gv_dump
do_hv_dump
doing_taint
do_ipcctl
do_ipcget
do_magic_dump
do_msgrcv
do_msgsnd
do_ncmp
do_open6
do_open_raw
do_op_dump
do_pmop_dump
do_print
do_readline
doref
do_seek
do_semop
do_shmio
do_spawn
do_spawn_nowait
do_sv_dump
do_sysseek
do_tell
do_trans
do_uniprop_match
do_vecget
do_vecset
do_vop
drand48_init_r
drand48_r
dtrace_probe_call
dtrace_probe_load
dtrace_probe_op
dtrace_probe_phase
dump_all_perl
dump_indent
dump_packsubs_perl
dump_sub_perl
dump_sv_child
dump_vindent
dup_warnings
emulate_cop_io
find_first_differing_byte_pos
find_lexical_cv
find_runcv_where
find_script
foldEQ_latin1
foldEQ_latin1_s2_folded
foldEQ_utf8_flags
_force_out_malformed_utf8_message
form_alien_digit_msg
form_cp_too_large_msg
free_tied_hv_pool
free_tmps
get_and_check_backslash_N_name
get_db_sub
get_debug_opts
get_deprecated_property_msg
getenv_len
get_hash_seed
get_invlist_iter_addr
get_invlist_offset_addr
get_invlist_previous_index_addr
get_mstats
get_no_modify
get_opargs
get_ppaddr
get_prop_definition
get_prop_values
get_regclass_nonbitmap_data
get_regex_charset_name
get_re_arg
get_re_gclass_nonbitmap_data
get_vtbl
gimme_V
gp_free
gp_ref
grok_bin_oct_hex
grok_bslash_c
grok_bslash_o
grok_bslash_x
gv_check
gv_fetchmeth_internal
gv_override
gv_setref
gv_stashpvn_internal
he_dup
hek_dup
hfree_next_entry
hv_auxalloc
hv_backreferences_p
hv_common
hv_common_key_len
hv_delayfree_ent
hv_kill_backrefs
hv_placeholders_p
hv_pushkv
hv_rand_set
hv_undef_flags
init_argv_symbols
init_constants
init_dbargs
init_debugger
init_i18nl10n
init_i18nl14n
init_named_cv
init_stacks
init_tm
init_uniprops
_inverse_folds
invert
invlist_array
invlist_clear
invlist_clone
invlist_contents
_invlistEQ
invlist_extend
invlist_highest
invlist_is_iterating
invlist_iterfinish
invlist_iterinit
invlist_iternext
invlist_lowest
invlist_max
invlist_previous_index
invlist_set_len
invlist_set_previous_index
invlist_trim
_invlist_array_init
_invlist_contains_cp
_invlist_dump
_invlist_intersection
_invlist_intersection_maybe_complement_2nd
_invlist_invert
_invlist_len
_invlist_search
_invlist_subtract
_invlist_union
_invlist_union_maybe_complement_2nd
invmap_dump
io_close
isFF_overlong
is_grapheme
is_invlist
is_utf8_char_helper_
is_utf8_common
is_utf8_FF_helper_
is_utf8_overlong
_is_cur_LC_category_utf8
_is_in_locale_category
_is_uni_FOO
_is_uni_perl_idcont
_is_uni_perl_idstart
_is_utf8_FOO
_is_utf8_perl_idcont
_is_utf8_perl_idstart
jmaybe
keyword
keyword_plugin_standard
list
load_charnames
localize
lossless_NV_to_IV
lsbit_pos32
lsbit_pos64
magic_cleararylen_p
magic_clearenv
magic_clearisa
magic_clearpack
magic_clearsig
magic_clear_all_env
magic_copycallchecker
magic_existspack
magic_freearylen_p
magic_freecollxfrm
magic_freemglob
magic_freeovrld
magic_freeutf8
magic_get
magic_getarylen
magic_getdebugvar
magic_getdefelem
magic_getnkeys
magic_getpack
magic_getpos
magic_getsig
magic_getsubstr
magic_gettaint
magic_getuvar
magic_getvec
magic_killbackrefs
magic_nextpack
magic_regdata_cnt
magic_regdatum_get
magic_regdatum_set
magic_scalarpack
magic_set
magic_setarylen
magic_setcollxfrm
magic_setdbline
magic_setdebugvar
magic_setdefelem
magic_setenv
magic_setisa
magic_setlvref
magic_setmglob
magic_setnkeys
magic_setnonelem
magic_setpack
magic_setpos
magic_setregexp
magic_setsig
magic_setsigall
magic_setsubstr
magic_settaint
magic_setutf8
magic_setuvar
magic_setvec
magic_set_all_env
magic_sizepack
magic_wipepack
malloced_size
malloc_good_size
markstack_grow
mem_collxfrm
mem_log_alloc
mem_log_free
mem_log_realloc
_mem_collxfrm
mg_find_mglob
mg_size
mode_from_discipline
more_bodies
more_sv
moreswitches
mortal_getenv
mro_get_private_data
mro_meta_dup
mro_meta_init
msbit_pos32
msbit_pos64
multiconcat_stringify
multideref_stringify
my_atof2
my_atof3
my_attrs
my_clearenv
my_lstat
my_lstat_flags
my_memrchr
my_mkostemp_cloexec
my_mkstemp_cloexec
my_stat
my_stat_flags
my_strerror
my_unexec
NATIVE_TO_NEED
newFORM
newGP
newMETHOP_internal
newMYSUB
newPROG
new_stackinfo
newSTUB
newSVavdefelem
new_warnings_bitfield
newXS_deffile
_new_invlist
_new_invlist_C_array
nextargv
no_bareword_filehandle
noperl_die
notify_parser_that_changed_to_utf8
oopsAV
oopsHV
op_clear
op_integerize
op_lvalue_flags
opmethod_stash
op_refcnt_dec
op_refcnt_inc
op_relocate_sv
opslab_force_free
opslab_free
opslab_free_nopad
op_std_init
op_unscope
package
package_version
pad_add_weakref
padlist_store
padname_free
PadnameIN_SCOPE
padnamelist_free
parser_dup
parser_free
parser_free_nexttoke_ops
parse_unicode_opts
path_is_searchable
peep
perl_alloc_using
perl_clone_using
PerlIO_context_layers
PerlIO_restore_errno
PerlIO_save_errno
PerlLIO_dup2_cloexec
PerlLIO_dup_cloexec
PerlLIO_open3_cloexec
PerlLIO_open_cloexec
PerlProc_pipe_cloexec
PerlSock_accept_cloexec
PerlSock_socketpair_cloexec
PerlSock_socket_cloexec
perly_sighandler
pmruntime
POPMARK
populate_isa
pregfree
pregfree2
qerror
ReANY
reentrant_free
reentrant_init
reentrant_retry
reentrant_size
re_exec_indentf
ref
regcurly
regdump
regdupe_internal
regexec_flags
regfree_internal
reginitcolors
reg_named_buff
reg_named_buff_all
reg_named_buff_exists
reg_named_buff_fetch
reg_named_buff_firstkey
reg_named_buff_iter
reg_named_buff_nextkey
reg_named_buff_scalar
regnext
reg_numbered_buff_fetch
reg_numbered_buff_length
reg_numbered_buff_store
regprop
reg_qr_package
reg_skipcomment
reg_temp_copy
re_indentf
re_intuit_start
re_intuit_string
re_op_compile
report_evil_fh
report_redefined_cv
report_wrongway_fh
re_printf
rpeep
rsignal_restore
rsignal_save
rvpv_dup
rxres_save
same_dirent
save_bool
save_clearsv
save_delete
save_destructor
save_destructor_x
save_freeop
save_freepv
save_freesv
save_I16
save_I32
save_I8
save_int
save_iv
save_long
save_mortalizesv
save_pptr
save_re_context
save_sptr
savestack_grow
savestack_grow_cnt
save_strlen
save_to_buffer
sawparens
scalar
scalarvoid
scan_num
scan_str
scan_word
seed
set_caret_X
setfd_cloexec
setfd_cloexec_for_nonsysfd
setfd_cloexec_or_inhexec_by_sysfdness
setfd_inhexec
setfd_inhexec_for_sysfd
set_numeric_standard
set_numeric_underlying
set_padlist
_setup_canned_invlist
share_hek
should_warn_nl
should_we_output_Debug_r
sighandler
sighandler1
sighandler3
single_1bit_pos32
single_1bit_pos64
skipspace_flags
Slab_Alloc
Slab_Free
Slab_to_ro
Slab_to_rw
softref2xv
sortsv_flags_impl
stack_grow
str_to_version
sub_crush_depth
sv_2iv
sv_2uv
sv_add_backref
sv_buf_to_ro
sv_del_backref
sv_free2
sv_i_ncmp
sv_i_ncmp_desc
sv_kill_backrefs
sv_magicext_mglob
sv_ncmp
sv_ncmp_desc
sv_only_taint_gmagic
sv_or_pv_pos_u2b
sv_resetpvn
sv_sethek
sv_setsv_cow
SvTRUE_common
sv_unglob
sys_init
sys_init3
sys_intern_clear
sys_intern_dup
sys_intern_init
sys_term
tied_method
tmps_grow_p
TOPMARK
to_uni_fold
to_uni_lower
to_uni_title
to_uni_upper
_to_fold_latin1
_to_uni_fold_flags
_to_upper_title_latin1
_to_utf8_fold_flags
_to_utf8_lower_flags
_to_utf8_title_flags
_to_utf8_upper_flags
translate_substr_offsets
try_amagic_bin
try_amagic_un
uiv_2buf
unlnk
unshare_hek
utf16_to_utf8
utf16_to_utf8_base
utf16_to_utf8_reversed
_utf8n_to_uvchr_msgs_helper
utf8_to_utf16_base
utf8_to_uvchr_buf_helper
utilize
uvoffuni_to_utf8_flags_msgs
uvuni_to_utf8
valid_utf8_to_uvuni
variant_byte_number
varname
vivify_defelem
vivify_ref
wait4pid
_warn_problematic_locale
was_lvalue_sub
watch
win32_croak_not_implemented
write_to_stderr
xs_boot_epilog
xs_handshake
yyerror
yyerror_pv
yyerror_pvn
yylex
yyparse
yyquit
yyunlexThe autodocumentation system was originally added to the Perl core by Benjamin Stuhl. Documentation is by whoever was kind enough to document their functions.
config.h, perlapi, perlapio, perlcall, perlclib, perlembed, perlfilter, perlguts, perlhacktips, perlinterp, perliol, perlmroapi, perlreapi, perlreguts, perlxs